PRECISION MAKING RULE 6" - INCRA (USA)

PRODUCT DETAILS

• Model : RULE150M
• Incra  micro-fine patented guide holes and slots at every 0.25mm, 0.5mm, 0.75mm or 1mm, from 0 to 150mm or 300mm. They also offer 0 to 50mm height marking slots on the end in millimeters
• Incra micro-fine patented guide holes and slots at the outer edges of the t-rule's top and bottom are spaced every 1mm, whilst the four centre rows of holes are at 0.25mm increments
• You can draw a short line at any mm spacing using the outside slots
• By selecting the centre rows and twisting your mechanical pencil you can spot mark any measurement to a full mm or 0.25mm, 0.5mm, 0.75mm or 1mm, before reaching the next full mm - this gives these rules the best accuracy you can achieve when marking out
• The end reference bar can be easily removed or slid to to the left or right hand side of the rule allowing marking out tight into a corner of a cabinet or joint. It is also great for marking precise lines parallel up to 150mm from an edge
• The t-rule has an anodized aluminum fence keeping the ruler straight when marking out long lines

Incra Precision Marking Rule Incra Rule

Customer Reviews

Write a review